Need help?Do you have a question about the ITRON MZT and is the answer not in the manual?
General| Brand | ITRON |
|---|---|
| Model | MZT |
| Category | Measuring Instruments |
| Language | English |
Declares conformity with Pressure Equipment Directive, including type approval certificate.
Product fulfils EMC Directive by meeting specific single standards.
Declares conformity with ATEX Directive, including type approval certificate and standards.
Explains how gas flow turns a turbine wheel and is transmitted to the totaliser.
Describes packaging, including carton box, pallet, plugs, and lubricant.
Specifies storing under cover in a clean, dry environment at -40°C to +70°C.
Advises careful handling, lifting with belts or eyelets.
Mentions Annex 2, PED info, clean gases, oil pump, damage check, no welding, flange alignment, torque, inlet pipe, transmitter connections.
Advises using large radius elbows, concentric pieces, avoiding obstacles, and correct gasket centering.
Details procedures for starting with upstream valve, upstream/downstream valves, and by-pass, including pressure limits.
Lists LF, Reed switches, anti-tampering, HF transmitters, and Cyble sensor options.
Provides safety remarks for hazardous areas, including intrinsic safety, protected aluminum, earthing, and appropriate tools.
States MZ needs no particular attention after proper installation.
Details periodic lubrication for oil pump meters, lists specific oils, and provides quantities and periodicity.
Explains replacement of the cartridge when its color changes.
Describes spin test, recommendations for aggressive gases, safety, spare parts, and cleaning.
Advises installing the meter tension-free and avoiding mechanical constraints.
Specifies a minimum inlet distance of 3 x DN to ensure accuracy.
To Next Page
