EasyManua.ls Logo

iTronics ITB-500HD - General Settings and Recording Capacity

iTronics ITB-500HD
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to change the user settings
30
Shock-Sensing Sound Alarm : Set the Sound Alarm announcement when
recording Event File by impact sensing on the vehicle. However, you can
not use this function in case the shock sensing menu while driving is set to
OFF at Driving Setting Mode.
File Deletion Type : Set the file deletion type of recorded images but you
can not set this function in case both shock-sensing while driving and
parking mode setting are set to “OFF”. Please refer to page 31~32 for
detailed way of recording. (You can adjust the ratio with computer mouse
by clicking and moving the small circle on the straight line path.)
Time Zone : You can set the standard time zone of your area
Firmware Version : Displays the firmware version of the product.
Mode HD (1280x720) D1 (720x480)
Recording Angle (Diagonal) 120 degrees 120 degrees
Numbers of frames per second
(fps)
Each 15 fps for Front & Rear Each 15 fps for Front & Rear
Recording time per file 2 minutes 2 minutes
Recording Time Available
(based on 8GB SD Memory Card)
3 hours 30 minutes 5 hours 25 minutes
General Setting
Recording Time Available per Setting (Actual recording Time may somewhat vary.)

Related product manuals