EasyManua.ls Logo

iTronics ITB-500HD - GPS Module Usage Guidelines

iTronics ITB-500HD
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attention to GPS (optional for ITB500HD)
1. Please note GPS connectivity can take up to 10 minutes to connect depending on the gps
receivers view of the sky and position of satellites. The processing time for a gps connection
will vary depending on certain factors such as weather conditions, the vehicles surroundings
and the position of satellites.
2. Please note the overall functioning of the product such as video recording is not effected by
a poor or unstable GPS connection.
3. Please make sure the GPS receiver is mounted behind a clear, non tinted part of the interior
windshield. Avoid installing the GPS receiver behind dark tinting or metal parts of the dash
board.
4. If the camera lens is tilted too far backwards for in-vehicle video recording, the GPS
reception may become poor (this applies to inbuilt GPS camera devices). This is because the
built-in GPS receiver faces down to the ground and may be unable to communicate with GPS
satellites. Please revert back the direction of camera lens to the front after in-vehicle
recording.
5. Do not use this product with other products that generate electromagnetic waves. This may
interfere with the GPS signal and reduce the performance of GPS reception.
9

Related product manuals