To Next Page
V
vgonzalezJul 25, 2025
What to do if my ITT Flowtronex SIlent Storm has low discharge pressure?
- RRichard OrtizJul 25, 2025
If your ITT Water Pump has a low discharge pressure fault, several factors could be responsible. It could be due to a flow rate exceeding the station's capacity or the system's inability to pressurize in refill mode. Try adjusting the irrigation demand as required. Another reason might be a significant break in the irrigation piping, which would necessitate repair. Also, check for obstructions holding the valve open or damage to the pump discharge check valve; remove any foreign objects or replace the valve if needed. In addition, examine the system pressure transducer sensing line for blockages, and ensure the ball valve is correctly positioned. If city water pressure is lower than normal, contact the city and inspect the supply piping for obstructions.
General
