1. Stuffing box packing (if any) - one set for each stuffing box.
2. Stuffing box gland packing (if any) - one set.
3. Shaft sleeve - if any.
4. Ball bearings - one of each.
5. Shaft nut (if any).
6. Bearing locknut and washer (if any).
9.2 Instructions for ordering spare parts
Repair orders will be handled with the minimum of delay if the following directions are followed:
1. Give model number, size of the pump and serial number. These can be obtained from the name-
plate.
2. Write plainly the names, part numbers and materials of the parts required. These names and
numbers should agree with those on the Sectional view in 10.1 Sectional View and Parts List on
page 55.
3. Give the number of parts required.
4. Give complete shipping instructions.
9.2 Instructions for ordering spare parts
54 Model 3415 Installation, Operation, and Maintenance Manual
To Next Page
Loading...
Need help?
General
