ITW Foxjet Marksman Matrix - Ship Caps

Section 2: Installation
Marksman Matrix & Elite
2465-623 User Manual Rev F Page 7
Ship Caps
NOTE: If you place the Print Head Ship Cap on a hot print head and do not fasten it
securely, the print head will weep ink until the head has cooled down.
NOTE: Ink may accumulate behind the ship cap during shipping.
Remove the Vent Ship
Cap and Install the Fil-
ter. Remove the Res-
ervoir Ship Cap and
Install the Ink Bottle.
Remove Waste Reser-
voir Ship Cap and
install Waste Reser-
voir. Save caps in a
zip-lock bag for
future use.
THUMBSCREWS
SHIP CAP
VENT SHIP CAP
WASTE RESERVOIR