Appendix F: Communicating Directly to the Con-
2465-623 User Manual Rev F Page 92
Appendix F: Communicating Directly to the Controller
Refer to the Ethernet Protocol document 2465653N when communicating directly to the
controller.
Appendix G: Using Serial.cgi Commands through the Serial
Port
Refer to the Marksman Duo Serial Commands document 2465654N.
Appendix H: Using Marksman Net Software to Communicate
to the Matrix
Refer to the Marksman Net/Marksman Next manual 2464308.
Appendix I: Using the Marksman Net Protocol to Control the
Matrix
Refer to the Marksman Net Commands document 2465655N.
Appendix J Using the Print Monitor Software
Refer to the Print Monitor Software document 2465656N.
To Next Page
Loading...