ITW Foxjet Marksman Matrix - Section 8: Troubleshooting

Section 8: Troubleshooting
Marksman Matrix & Elite
2465-623 User Manual Rev F Page 73
Print Quality Troubleshooting
This section shows examples of various print problems and actions which should be taken
to improve the print.
Problem: Minor fractures in print channels.
Possible Cause: Debris on front plate, air in channel.
Action: Run APS. Add brushes and positive air flow to minimize debris build-up.
Problem: Missing channels and channel fractures in print channels.
Possible Cause: Excessive debris on front plate, air in channel.
Action: Wipe front plate and run APS. Add brushes and positive air flow to minimize debris
build-up.
Problem: Missing print channels.
Possible Cause: Air in channel.
Action: Run APS. If air cannot be removed, follow procedure for “Recirculation” on
page 12.