Section 5: Getting Started
2465-623 User Manual Rev F Page 28
Reports
Scan reports
The Scan Report contains information relating to the current task and scan results of a
printed barcode. The scan results are received through the RS232 port from a barcode
scanner properly. configured and connected to the Marksman© controller.
Date:
Date is the date the scan event occurred.
Line:
Line is the production line that the scan event occurred on.
Message:
Message is the name of the message operating while the scan event occurred.
Barcode:
Barcode is the barcode data scanned and received. The contents of this field
may contain the words NO READ if the barcode could not be decoded.
Total:
Total number of decode attempts, including successful and failed decodes.
Good:
Good indicates the number of successful decodes of the scanned barcode.
Export:
Export allows the information to be saved in a comma delimiter format so it can be
used in other software applications.
Enabled:
Allows for the collection of data.
Auto Export at Task Start:
Exports an entry to text file defined by export path.
Print reports
The Print Report contains historical information regarding the printing operation. The print
report is a table named
reports within a Microsoft® Access® Database named Marksman
Elite. Click on
Reports then select Printer Report from the menu.
Time:
Date and time that the
action occurred.
Action:
The event such as
Start or Stop Message.
User:
The User who was
logged in at the time the
action occurred.
Counts:
Counts is the product
count of the task for which the
action applies.
Line:
The production line that
the information is for.
Message:
The name of the
message for which the action applies.
Export:
Export allows the information to be saved in a comma delimiter format so it can be
used in other software applications.
Auto Export at Task Start:
Exports an entry to text file defined by export path.
Enabled: Allows for the collection of data.
To Next Page
Loading...