Section 6: BoxWriter© Matrix & Elite Editor
2465-623 User Manual Rev F Page 41
An example of UPCA barcode parame-
ters is shown at right.
Magnification:
The value displayed in the
Magnification field on the Barcode ele-
ment dialog.
Bar height:
The total height of the symbol
in pixels.
Bar width
and Space width: Define the
width, in pixels, of the symbol's bar/space
modules.
Font name:
Displays a list of all TrueType
fonts installed on the system.
Font size:
The height of the font in pixels.
Avg font width:
Defines the aver-
age character width (in pixels). A
value of 0 means that Windows
will use the font's default widths.
Magnification:
The value dis-
played in the Magnification field
on the Barcode element dialog.
Total height:
The total height of
the symbol in pixels.
Horz. bearer:
Specifies the width
of the symbol's horizontal bearer,
in thousandths of an inch.
Vert bearer:
Specifies the width
of the symbol's vertical bearer, in
thousandths of an inch.
Quite zone:
Specifies the width of
the symbol's quiet zone, in thou-
sandths of an inch.
Font Name:
Displays a list of all TrueType fonts installed on the system.
Font Size:
Refers to the height of the font in pixels.
To Next Page
Loading...