Section 6: BoxWriter© Matrix & Elite Editor
2465-623 User Manual Rev F Page 44
Open
To open an existing task, choose
File > Open.
Select the task to be opened, and
click
OK; or double-click the task to
be opened.
Checking the "Open read only" box
will open the task in read-only mode
(i.e., the user will not be able to mod-
ify the task).
Checking the "Show preview" box
will show a preview of the selected
task. For large tasks, it may take
several seconds to generate the pre-
view.
Copy
To copy tasks from one line to
another, choose
File > Copy.
Select the line to copy from, then
select the tasks to be copied.
Checking the "All" box will auto-
matically select all existing tasks
for the given line.
When the desired tasks are
selected, click
Copy.
If successful, you will see a confir-
mation message.
The user may change both the
"To" and "From" lines and perform the copy function multiple times.
Click
OK after to save the changes.
To Next Page
Loading...