ITW Foxjet Marksman Matrix - Elite Wiring Diagram

Appendix A: Specifications
Marksman Matrix & Elite
2465-623 User Manual Rev F Page 81
Electrical Connections: Male DB-25 connector located on the rear of the print head.
Print Orientation: Integrated - Horizontal or horizontal angle (for incline printing)
Ink System: Non-pressurized capillary feed technology
Priming: Automatic Priming System (not included with Alpha-
Coder Print Heads)
Float switch sensor: Low ink and full waste bottle detection
(waste detection not included with AlphaCoder Print Heads)
Ink Specifications: ScanTrue® II PLUS (384e and 768e Print Heads), Pigmented
oil-based for porous surfaces
Technical Data:
Operating Conditions: Temperature: 50° - 104° F (10° - 40° C)
Relative Humidity: 20 - 80% (non-condensing)
Storage Conditions: Temperature: 32° - 109°F (0° - 43° C)
Relative Humidity: 20 - 80% (non-condensing)
384e Head 768e Head
Image Area: .38" - 2" (10 - 51mm) .38" - 4" (10 - 102mm)
Channels: 128 256
Orifices: 384 768
Horizontal Resolu-
tion:
150 or
300 dpi
150 or
300 dpi
Lines of Print: 1 - 21 1 - 42