1
ENGLISH
NEF SERIES
ELECTRONIC INJECTION
SYSTEM
N40 ENT M25
N60 ENT M37
N60 ENT M40
N67 ENT M45
U
SE AND MAINTENANCE
INTRODUCTION
We would like to thank you for buying an IVECO MOTORS product,
and compliment you on your choice of engine.
Before you carry out any operation involving the engine or its fittings,
please read the contents of this manual carefully; compliance with the
instructions provided in the manual is the best way to guarantee trouble-
free, long term operation of the engine.
The contents of this manual refer to the standard configuration of the
engine, and the illustrations are purely indicative. Some instructions are
provided by giving the sequence of operations to be carried out in order
to allow the engine and/or its fittings to perform in a certain way. In
some cases they will be dependent on the configuration of the
commands and the set-up of the vessel on which the engine is installed;
for any points that differ from the contents of this manual, please consult
the instructions provided by the Boatbuilder or a specific manual.
The information provided below was current at the date of publication.
The Manufacturer reserves the right to make modifications at any time
without prior notice, for technical or commercial reasons or to update
the engines to comply with legal requirements in the various Countries.
The Manufacturer declines all liability for any errors or omissions.
Please remember that the IVECO MOTORS Technical Service
Network is available to offer you its experience and professional skills,
wherever you may be.
To Next Page
Loading...
Need help?
General
