IVT BlueSoleil™ User Manual
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
25
on the GN side. (Notes: To use DHCP, the BT Network Adapter on
the client side must be set to obtain an IP address automatically.
The IP address is in the form of 192.168.18.xxx.)
♦ Click Apply or OK button to save the configuration.
♦ Right-click the Personal Area Networking icon again, then choose
Start Service. (Figure 4.7)
Figure 4.6: Set up Bluetooth Personal Area Network Configuration