12
Control panel
Control panel buttons and displays
The control panel is the heart of your heat pump installation. From the control panel, instructions are
sent to the Rego600 control unit, which ensures that the house is uniformly heated. All settings are
carried out here and the display shows the settings that have been set.
Rego600 K1
020301 12.00.00 Fr
Heat Info Menu
The heat pump is in
operation when this
lamp is lit.
This lamp is lit when
the heat pump needs
additional heat.
This lamp is lit when
hot water is being
heated. It blinks during
hot water peaks and
additional hot water.
This lamp blinks when
a fault has occurred.
This switch is used to
turn the heat pump on
and off. The heat pump
is in operation when
the lamp is lit. The heat
pump is off when it
blinks.
This shows you
which user level
you are in.
This display
shows information
such as text and
temperatures.
Press once to come to
the complete menu for
settings and tempera-
tures.
Press once for
continuous informa-
tion about operation
conditions for the heat
pump and additional
heat.
Press once for a short
cut to the heat
settings.
This knob is used
to navigate the
menu and to
change settings.
To Next Page
Loading...
Need help?
General