8
C series components
Please note: The picture shows a 1-phase unit.
3-way valve that switches
between heating and
domestic hot water.
Double-shelled
hot water heater.
Immersion heater.
Reset button for overheat
protection on the immer-
sion heater.
Circulation pump on
the hot side.
Flexible hoses on the hot side
for vibration free operation.
Frequency adapted sound-
proof cover on compressor.
Electrical connection.
Control panel with large
display.
Enclosed electrical box
with motor protection
reset and circuit breaker
for heat pump and immer-
sion heater.
Control unit Rego600.
Insulated corrosion
protected circulation
pump for the heat transfer
fluid system.
Expansion valve.
Sight glass.
To Next Page
Loading...
