9
D and E series components
Please note: The picture is of the E series, 1-phase.
The D series has two connections on the hot side and does not include a 3-way valve and immersion
heater. The particle filter is supplied separately and is mounted outside the heat pump.
3-way valve that changes
between heating and
domestic hot water.
Cleanable particle
filter with cut-off.
Immersion heater.
Reset button for over-
heat protection on the
immersion heater.
Circulation pump
on the hot side.
Flexible hoses on the
hot side for vibration
free operation.
Frequency adapted
soundproof cover.
Electrical connection.
Control panel with
large display.
Enclosed electrical box with
motor protection reset and
circuit breaker for heat pump
and immersion heater.
Control unit Rego600.
Heat exchanger.
Insulated corrosion protected
circulation pump for the heat
transfer fluid system.
Compressor.
Expansion valve.
Sight glass.
To Next Page
Loading...
