IXOLIFT DataLift 250 - Unpacking; Storage; Transportation

13
OPERATING MANUAL – DataLift 250
UNPACKING
The DataLift is delivered on a euro pallet and xed with 4xM8 hexagon screws. There are two ramps
supplied for unloading.
Only use attached ramps!
Wrench size: 13mm for xing screws.
Wood screw bit: TX20
Wear safety shoes while working! Drive backwards down the pallet!
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
5
A0
Datalift 250 Outline_V1
Ixo_Datalift_250
Status
Changing
Date Name
Edit
Check
Standard
Date Name
24.03.2022 HHM
Material:
Mass: N/A
100056_Datalift Packed.iam
Tol.:
ISO 2768-mH
ISO 13920-BF
1:5
+0,1
+0,3
unvermaßte Kanten/
undimensioned edges
ISO 13715
-0,1
-0,3
( )
STORAGE
The DataLift is build for storage in temperatures of -10°C to 45°C. The limiting factor is the battery. In
extreme conditions the lifetime is shortened. Always switch off the main switch and recharge latest
after 6 months. The humidity is Max. 90% relative.
TRANSPORTATION
The unit is xed with bracket and screw to the pallet. There is a ramp included with the DataLift when
supplied from the factory. Do not lift the unit on improper lifting points. Only unload the unit by use of
the ramp. Always turn off the main switch during transportation.