5
OPERATING MANUAL – DataLift 250
USE OF THE PRODUCT
GENERAL
Only use on level surface and never go under the load.
Always follow the safety instructions of this manual.
LIFTING AND LOWERING
The DataLift is switched on with the main switch (5). Please always switch off when the unit is not in
use.
With the push buttons on the remote control (1) the platform can be lifted and lowered, always check
the travel path before you start as well as the maximum load. The platform table must be in the
centred position when lifting and lowering the platform.
MOVEMENT OF THE PLATFORM
The table handle (17) moves the platform table to the right and left. Move the table handle downwards
to unlock the platform and move the table platform.
The max load for using the side travel depends on the lifting height.
Centre load is always 250kg max.
When lifting higher than 1,5m the load needs to be reduced to 125kg for side movement.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
4
A0
Datalift 250 Outline_V1
Ixo_Datalift_250
Status
Changing
Date Name
Edit
Check
Standard
Date Name
24.03.2022 HHM
Material:
Mass: N/A
115124 Datalift mechanical assy.iam
Tol.:
ISO 2768-mH
ISO 13920-BF
1:10
+0,1
+0,3
unvermaßte Kanten/
undimensioned edges
ISO 13715
-0,1
-0,3
( )
IXODL250-001
IXODL250-001
IXODL250-002
IXODL250-002
IXODL250-003
IXODL250-004IXODL250-004
IXODL250-005
IXODL250-009
IXODL250-006
IXODL250-007
IXODL250-010
IXODL250-008
IXODL250-019
IXODL250-021
IXODL250-020
IXODL250-020
IXODL250-016
IXODL250-017
IXODL250-018
IXODL250-014
IXODL250-013
IXODL250-011
IXODL250-010
IXODL250-015
IXODL250-012
IXODL250-022
IXODL250-022
To Next Page
Loading...