iZone 225 - Initialisation Process and Display


2.1 During initialisation
/!  0!)
2#

1(2 
2!
3"2 !
'2 
2G

3

435
1##
()
(&
6&
"7&
645
8%
(#9*&:*&
&#
)*&
:*$
9*
(#
#
;%
This screen will be displayed whenever the
system is reset or when power is restored
after a power failure. None of the previous
settings or parameters are lost.
This image is an example only.
Your screen may display differently
depending on the system type,
what options are selected and the
configuration settings entered by
your installing contractor.