iZone 225 - Page 3

Table of contents
Section Description Page No.
2.0 System initialisation 25
2.1 During initialisation
26
3.0 System Configuration 27
3.1 Configuration main menu 28
3.2 Zone setup 29-30
3.2.1 Sensor configuration 31
3.2.2 Pairing and configuring iZone RF sensors 32
3.2.3 Sensor calibration 33
3.2.4 iSense controller configuration 34
3.3 AC unit configuration (iZone 325 only) 35
3.3.1 Fan auto configuration 36
3.3.2 Fan auto zone area setup 37
3.4 System options (Display, Taglines, Filter Maintenance, Locks, Non Standard Damper Motors) 38-39
3.5 WiFi bridge configuration 40
3.5.1 Manual IP configuration 41
3.5.2 WiFi connection 42
3.5.3 Smart phone, tablet and PC configuration 43-45
3.6 Home automation integration 46
