WORMHOLE SWITCH
USER MANUAL
11
5. If the “User Account Control” window appears on the screen,
Click “Yes” to continue.
6. When you see the pop-up message appear at the bottom right
of the screen then you are ready to operate the Wormhole
Switch application.
Troubleshooting:
If auto-run is not launched, please follow the step below to start the j5
Wormhole Switch application:
1. Check each connector on the USB cable that it is
correctly inserted on your two computers.
2. Go to My Computer and double-click the j5 Wormhole
Switch icon to start the application ( ). See the picture below.
To Next Page
Loading...
