WORMHOLE SWITCH
USER MANUAL
14
Note: Please make sure the network is available and Do Not unplug
during the driver update.
1. Remove the cable from the slave computer (keep the cable
plugged into the primary computer) and start the online update
(From the Wormhole Icon on the bottom right-hand corner of the
screen).
2. Select “Online update”
3. You will see either “Information window” or “Confirmation window”
pop-out. Select “OK” (if you already have the latest version) or “Yes”
(to proceed with updating the latest version of the Wormhole
software) in the confirmation window.
4. After you have finished the installation process plug in the
device to both computers. Now your Wormhole has the latest
version of software and is ready for use.
o About j5 Wormhole Switch:
All information of j5 Wormhole Switch will be shown
To Next Page
Loading...
