Jabra Noise Guide - Aluminum Table Stand Mounting

NOISE GUIDE – MANUAL RETURN TO "TABLE OF CONTENTS"
7
MOUNTING – ALUMINUM TABLE STAND
A
PullthecablethroughtubeA
B
PullthecablethroughtubeB
AssebletubeAandB.ScrewtubeABontothebase
discandconnecttheNoiseGuidetothepowercable.
ScrewtheNoiseGuideontothetube.
Mounttoaflatsurfaceasshownbelow.
Pleaseensurethatthecablecomesoutwherethereisahole
inthediscbasesothecableisnotpinched.
A
B