JABSCO 31395-0292 User Manual

www.PumpAgents.com
MODEL VOLTS AMP DRAW (A)
@ 10 psi (0.7 bar)
FUSE SIZE (A) OPEN FLOW
GPM (l/min)
MAX PSI (bar)
31395-0092 12V dc 4.4 10 2.9 (11) 50 (3.4)
31395-0094 24V dc 2.2 5 2.9 (11) 50 (3.4)
31395-0392 12V dc 4.4 10 2.9 (11) 40 (2.7)
31395-0394 24V dc 2.2 5 2.9 (11) 40 (2.7)
31395-0292 12V dc 4.4 10 2.9 (11) 25 (1.7)
31395-0294 24V dc 2.2 5 2.9 (11) 25 (1.7)
31295-0092 12V dc 3.5 10 1.9 (7) 25 (1.7)
31295-0094 24V dc 1.7 5 1.9 (7) 25 (1.7)
3.18
(80 mm)
4.24
(105 mm)
4.75
(121 mm)
9.00
(229 mm)
3.12
(80 mm)
2.25
(63 mm)
31295 / 31395 - SERIES
AUTOMATIC WATER SYSTEM PUMP
31295 / 31395 - Series
Pump Series Dimensions - Inches (mm) Weight
Height Width Length lb. (kg)
31X95-XXXX 4-3/4" (121) 6" (152) 9" (229) 3.5 (1.6 kg)
With pump switch off and battery fully charged, fill water tank,
open all faucets, then turn pump switch on. Water will begin to
flow. When the water is free of air, turn faucets off. Remember,
you are filling the water heater and the toilet and shower lines.
When all valves are shut-off, pump will stop. Should pump fail to
stop, turn switch off and see the trouble shooting guide.
OPERATION
DIMENSIONAL DRAWING
(2) 1/2” (13 mm) Hose Barbs
FEATURES
• Smooth Flow
• Self-Priming up to 10 feet (3m)
• Dry running capability
• Soft noise absorbing mounts
• Snap-fit port fittings
• Built-in bypass — less pulsation
• Reduces need for accumulator tank
• Corrosion resistant materials
• Thermal overload protection
• Motor rating: IP 54
• CSA listed
• ISO 8846 MARINE (ignition protection)
•
SPECIFICATIONS
Motor: Permanent Magnet, Ball Bearing Totally Enclosed.
Not for Continuous Duty. Intermittent Duty Only.
Pump: Body - Polypropylene
Diaphragm - Santoprene
Valves - EPDM
Fittings: (2) 1/2” - 14 Male pipe
PumpAgents.com - buy pumps and parts online
PumpAgents.com - Click here for Pricing/Ordering

JABSCO 31395-0292 Specifications

General

Brand	JABSCO
Model	31395-0292
Category	Water Pump
Language	English

Summary

Product Overview and Specifications

Key Features

Highlights smooth flow, self-priming, dry running, noise reduction, and durability.

Technical Specifications

Details motor type, pump materials, fittings, and overall pump series dimensions.

Pump Operation and Installation

Operating Instructions

Guidance on filling the tank, opening faucets, and pump shut-off behavior.

Installation Guide

Step-by-step instructions for mounting, connecting hoses, and port fittings.

Wiring and Electrical Setup

Instructions for connecting power supply, fuse, switch, and pump leads, including wire gauge.

System Components and Maintenance

System Diagram and Parts

Exploded view and service parts list for pressure switches, pumpheads, and fittings.

Winterizing Procedures

Steps to prevent damage from freezing, including draining and using non-toxic antifreeze.

Sanitizing and Troubleshooting

Sanitizing Potable Water System

Procedure for disinfecting the system using household bleach and water solution.

Troubleshooting Common Issues

Solutions for problems like pulsating flow, failure to prime, and motor issues.