To Next Page

To Previous Page

operating instructions-Electronic Parameter

PROJECT NAME | date 项目名称 | 日

期

CONFIDENTIA

P 3 3 1~100 0

Clip line electromagnet per cycle closing time (ms)

P 3 7 1~100 0

Clip line electromagnet per cycle opening time (ms) the force of Clip line

P 4 5 1~100 1

Back stitch electromagnet per cycle opening time (ms)

P 4 6 1~100 2

Back stitch electromagnet per cycle closing time (ms)

P 4 7 200~360 360

After trimming anti pull (It realizes trimming is pulled back function)

P 4 9 100~500 250

Trimming speed

P 5 0 100~500 150

Presser foot lifting electromagnet full output time ms

P 5 1 1~100 3

Presser foot lifting electromagnet per cycle opening time (ms)

P 5 2 0~800 100

Running delay time (ms) : when presser footer comes down to the

beginning of sewing. A little more longer will be better.

P 5 3 0/1 1

Presser foot lifting function selection 0: off 1: on

P 5 4 1~100 5

Presser foot lifting electromagnet per cycle closing time (ms)

P 5 6 0/1 1

Run to up needle position after Power on： 0: no action 1: action

P 5 7 0~600 100

Presser foot lifting electromagnet protection time 0.1s; 0 means no

protection. The longest time can be keep one minute. During the setting,

midway press foot lifter and press foot lifter after trimming are effective

P 6 0 200~5000 3000

The maximum speed of constant sewing (Automatic test speed)

Jack A3 User Manual

Questions and Answers: