AcAUTION
Sewing
IC\
This sewing mach
in
e should only be used by
\..Y
operators who have received the necessary training
in safe use beforehand.
0
If using a work table which has casters, the casters
should be secured
in
such a way so that they cannot
move.
IC\
The sew
in
g machine should n
ot
\..Y
applications other than sewing.
be used for any
A Attach all safety devices before using the sewing
L:!f:::;.
machine. If the machine is used without these
0
Be sure to wear protective goggles when using the devices attached, injury may result.
machine.
If
goggles are not worn, there is the danger that if a
needle breaks, parts
of
the broken needle may enter
your eyes and injury may result.
A Turn off the power switch at the following t
im
es. If the
l:!:':::;.
foot switch is depressed by mistake, the sewing
machine might start operating and injury could result.
• When threading the needle
• When replacing the bobbin and needle
• When not using the machine and when leaving the
machine unattended
A Do not touch any of the moving parts
or
press any
~
objects against the mach
in
e while sewing, as this
may result
in
personal injury
or
damage to the
machine.
0
0
If an error occurs in machine operation, or if abnormal
noises or smells are noticed, immediately turn
off
the
power switch. Then contact your nearest Brother
deal
er
or
a qualified technicia
n.
If
th
e machine develops a problem, contact your
nearest Bro
th
er
dealer
or
a qualified technician.
Cleaning
A Turn off the power switch before carrying out
~
cleaning.
If
the foot switch is depressed by mistake,
the sewing machine might start operati
ng
and injury
could resul
t.
fC\
Be sure to wear protective goggles and gloves when
\..Y handling the lubricating
oi
l and grease, so that they
do not get into your eyes
or
onto your skin.
If
the oil
and grease get into your eyes
or
onto yo
ur
skin,
inflammation can resul
t.
Furthermore, do not drink or eat the lubricating oil
or
grease. They may cause diarrhea
or
vomiting.
Keep the oil out of
th
e reach of children.
Maintenance and inspection
IC\
Maintenance and inspection
of
the sewi
ng
machine
\..Y
should only be carried out by a qualified technician.
0
Ask your Brother dealer
or
a qualified electrician
to
carry out any maintenance and inspection
of
the
electrical system.
A Turn off the power switch and disconnect the power
~
cord before carrying out the fo
ll
owing operations. If
the foot switch is depressed by mistake, the sewing
machine might start operating and injury could result.
• Inspection, adjustment
and
maintenance
• Replacing consumable parts such as the rotary
hook
A Disconnect the air hoses from the air supply
and
wait
~
for the needle on the pressure gau
ge
to drop
to
"
O"
before carrying out inspection, adjustment and repair
of
any parts which use the pneumatic equipment.
A Hold the machine head with both hands when tilting it
~
back
or
re
tu
rning it to i
ts
original position.
Furthermore, do not apply excessive force when
tilting back the machine head. The sewing machine
may become unbalanced and fall down, and serious
injury or damage
to
the sewing mach
in
e may result.
A
If
the power switch needs
to
be left on when carrying
L:!f:::;.
out some adjustment, be extremely caref
ul
to observe
all safety precautions.
0
0
Use only the proper replacement parts as specified
by Brother.
If any safety devices have been removed, be
absolutely sure to re-install them to their original
positions and check that they operate correctly before
using the machine.
IC\
Any problems in machine operation which result from
\..Y unauthorized modifications to the machine will not be
covered by the warranty.
iii
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
To Next Page
Loading...
