Jackson Labs PHASE STATION 53100A - Traceshowhatstatistics([Boolean Status]); Traceshowimag([Boolean Status]); Traceshownoisefloor([Boolean Status]); Traceshoworiginal([Boolean Status])

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 166
TraceShowHatStatistics([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show separated
variances (N-cornered hat) when available (Ctrl-h). Refer to this command for more
information.
To return the current flag value, call
TraceShowHatStatistics() with no argument.
TraceShowImag([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show imaginary part of
cross spectrum (Ctrl-F3). Refer to this command for more information.
To return the current flag value, call
TraceShowImag() with no argument.
TraceShowNoiseFloor([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show estimated
instrument noise (F2). Refer to this command for more information.
To return the current flag value, call
TraceShowNoiseFloor() with no argument.
TraceShowOriginal([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show original traces in
computed xDEV displays (F6). Refer to this command for more information.
To return the current flag value, call
TraceShowOriginal() with no argument.
TraceShowRaw([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show raw PN channel
trace(s) (Ctrl-r). Refer to this command for more information.
To return the current flag value, call
TraceShowRaw() with no argument.
TraceShowSlopes([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Show FFT segment filter
slope(s) (Ctrl-i). Refer to this command for more information.
To return the current flag value, call
TraceShowSlopes() with no argument.
TraceSmoothNoise([Boolean status])
Sets and/or retrieves the status of the flag controlled by Trace→Smooth noise traces
(Ctrl-w). Refer to this command for more information.
To return the current flag value, call
TraceSmoothNoise() with no argument.