en-44
5 CONTROLS
5.6.16 ECU COMMUNICATION FAULT ______________________________________
When this screen is shown, there is a communication fault with the engine
controller (ECU). Stop the engine as soon as possible and contact your lo-
cal Jacobsen Dealer.
5.6.17 MCU / DISPLAY COMMUNICATION FAULT ___________________________
When this screen is shown, there is a communication fault with the ma-
chine controller (MCU) and/or display. Stop the engine as soon as possible
and contact your local Jacobsen Dealer.
If a warning appears on the screen that is not listed in this manual, please refer to your authorised Jacobsen
support agent/dealer.
To Next Page
Loading...