Jacobsen LF 4677 - Controls; Tractor Control Icons

SPECIFICATIONS 2
7
2.4 WEIGHTS AND DIMENSIONS ________________________________________________
LF 4675/4677
Dimensions: Inches (mm)
Length - With grass catchers OFF ................ 108 (2740)
Height - Top of Steering Wheel ................... 58.7 (1491)
Width - Mow .................................................. 155 (3930)
Width - Transport............................................. 87 (2209)
Weights (4 WD mower): Lbs. (kg)
LF 4675 (less operator)............................... 3180 (1442)
LF 4677 (less operator)............................... 3450 (1565)
2.5 CUTTING UNITS ___________________________________________________________
LF 4675
Overall cutting Width:
5 Gang.......................100 in. (2.54 m)
7 Gang.......................139 in. (3.53 m)
Number of reels:
5 Gang.......................Five - three front, two rear.
7 Gang.......................Seven - three front, four rear
Reel Diameter .................5 in. (127 mm)
Reel Width.......................22 in. (559 mm)
Number of Blades/Reel ...7
Height of Cut ....................3/8 to 3/4 in. (9.5 to 19 mm)
Frequency of Cut .............0.074 in. / 1 mph
(1.88 mm / 1 kph)
LF 4677
Overall cutting Width:
5 Gang ...................... 100 in. (2.54 m)
7 Gang ...................... 139 in. (3.53 m)
Number of reels:
5 Gang ...................... Five - three front, two rear.
7 Gang ...................... Seven - three front, four rear
Reel Diameter ................. 7 in. (178 mm)
Reel Width ...................... 22 in. (559 mm)
Number of Blades/Reel... 9 or 11
Height of Cut ................... .3/8 to 1-1/8 in. (9.5 to 29 mm)
Frequency of Cut :
9 Blade Reel ............. 0.079 in. / 1 mph
(2.02 mm / 1 kph)
11 Blade Reel ........... 0.065 in. / 1 mph
(1.65 mm / 1 kph)