Jacuzzi cloud - Alarms

39
The connection to the alarm circuit must be carried out at the installation stage and in
compliance with the warnings detailed in the installation manual.
QWhen pressed, the button starts ashing from blue to white (HOME SPA model), or
will illuminate a xed colour ( BASE and DREAM models).
The buzzer is activated immediately (if the shower enclosure is connected to the alarm
circuit).
QWhen the alarm is activated, the current function or functions (except for those activat-
ed using the brassware and/or the scale removal cycle) will be immediately interrupted;
this will also occur if the shower unit is not connected to the alarm circuit.
 In the DREAM model, the Cromodream® function, if active, continues to function
whereas in the
HOME SPA model, it stops and the white light turns on.
If the "Turkish bath" function is active, the function is interrupted and a washing cycle is
carried out, after which the system returns to "stand by" mode.
Q If no functions are in progress (except for those activated using the brasswear and/or
the scale remover cycle) the
key turns on and all the functions are inhibited. Pressing
the key again turns o the blue colour, the white colour turns on and all the electronic
functions are enabled.
Q To stop the alarm, press the key (the shower enclosure will switch back to "stand
by" mode).
Alarms