43
QHOME SPA
After it is turned on, the shower enclosure switches to "stand by" mode. The key ashes.
QPressing the
key switches to the activation of the electronic functions. All keys turn
on with a high intensity. For the audio functions, only the
key illuminates.
Before using the audio system, the MP3 player must be set up to communicate with Cloud's
Bluetooth® device: therefore you must follow a recognition procedure to connect the two sys-
tems.
QFollow the instructions provided in the smartphone or MP3 player manual on how to
link the two systems.
Q The
key will switch from white to blue, indicating that the connection with the
Bluetooth® device was successful. The
and keys turn on white at a high intensity.
Note: The other audio function keys are only activated if an AVRCP* connection is available.
* AVRCP (Audio/Video Remote Control Prole): it is used to send commands (for example fast forward, pause, play).
ATTENTION: make sure that the Bluetooth® device associated with the Cloud enclo-
sure supports an AVRCP connection.
Once linked, the smartphone or MP3 play and the Bluetooth® device can be connected
without having to carry out the connection procedure each time; this connection procedure
is however required when saved settings are deleted, for example following repairs or reset or
upon reaching a maximum number of 14 pairings.
When a 15th pairing is recognised, the Bluetooth® module deletes all the pairings.
In order to use the audio system, select the Bluetooth® device, named “BT Jacuzzi”; the relative
access code is 0000.
The access code can be changed in "start" mode. The values that can be set are 0000, 0001,
0002, 0003.
QIn "start" mode, press
for approx. 3 seconds. The keys will ash to indi-
cate the currently active password.
Press
or or to change the password set by default "0000".
= 0000 (default)
= 0001
= 0002
= 0003
QConrm the password by pressing .
Its storage is conrmed when the
keys turn o.
Bluetooth®
audio system
Bluetooth® connection password