Jacuzzi J-200 Series Owner's Manual

J-200
11.4 Programming the CLEARRAY® Timer
A programmable change bulb timer can be set to remind you when to
when it is time to replace the UV bulb for the CLEARRAY system.
• The default setting is for 365 days.
• The timer range is from OFF to 365 days, in increments of 10 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually have the CLEARRAY system effectively preform its function,
it should be program as instructed.
A. Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each
selection the screen will revert back to the Main Menu and the
current settings will remain active.
1. Press until you get to the “UV” Menu. The display will scroll
“CLEARRAY BULB.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to conrm this
selection. The system will return to the “CLEARRAY BULB” Menu.
4. Once the timer expires the display will alternate between the water
temperature and “CHANGE CLEARRAY BULB” page 48.
11.5 Programming the Water Refresh Timer
A programmable water refresh timer can be set to remind you when to
when it is time to drain and rell your hot tub.
• The default setting is for 180 days.
• The timer range is from OFF to 180 days, in increments of 30 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain the water healthy and clean, in addition to chemical
maintenance, it should be program as instructed.
A. Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each
selection the screen will revert back to the Main Menu and the
current settings will remain active.
1. Press until you get to the “H2O” Menu. The display will scroll
“WATER REFRESH.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to conrm this
selection. The system will return to the “WATER REFRESH” Menu.
4. Once the timer expires the display will alternate between the water
temperature and “CHANGE WATER” page 49.
33

Jacuzzi J-200 Series Specifications

General

Brand	Jacuzzi
Model	J-200 Series
Category	Hot Tub
Language	English