J-Dream Owner’s Manual
Test for Leaks and Attach Side and Bottom Panels
Turn ON electric power at main breaker. Operate the unit and check for leaks. attach side and bottom panels. Take
the bottom panel at an angle and insert under the bottom of the enclosure frame. Rotate backwards till it is up against
the brackets with the pre-installed Velcro
®
.
Enclosure
Base
Frame
Front or
Side
Panel
Removable Face Panels
Niche Model Only: Use
finishing strip material
(not provided) to cover
gap between J-Dream
and finshed wall. Do not
attach finishing strips to
face panels.
Bottom Face Panel fastened with Velcro®
Velcro®
Velcro®
27
To Next Page
Loading...
