11
Water temperature duration
°C min’
34° - 36° 20’
36° - 38° 15’
38° - 40° 10’
I Essential oils and perfumes can be used, provided that
they do not create foam.
• We recommend that you fill the tub with water that is already
mixed, (that is, do not fill with boiling water and then cold
water) at a maximum temperature of 60°C, to prevent damage
to hosing and to reduce scale deposits.
• Soap and bubble bath (if not specifically for hydromassage)
must only be used when the hydromassage function is
switched off.
• (fig. 9) (“Top” versions) If it has not already been done
during tub installation, fill the appropriate tank with the liquid
provided for sanitizing the water circuit (refer also to related
chapter).
• If the tub does not include a sanitizing system, the liquid is
to be poured directly into the tub each time a sanitizing cycle
is run. Refer to the chapter "Sanitizing water circuit" for fur-
ther information.
NOTE
7
8
9
To Next Page
Loading...
