Jacuzzi Muse - Maintenance System (Where Provided)

41
The function may only be activated
when the hydromassage is on
The water temperature value is regu-
larly monitored and appears on the
display
When the hydromassage stops, the
maintenance system is automatically
disabled.
stopping
the function
Water
temperature
maintenance
system
(where present)
T
his device helps you maintain the tub water temperature at a suitable temperature for
hydromassage.
QHold down the key displayed: it becomes brighter and the maintenance system is acti-
vated (after a few seconds, the display will present the current water temperature).
35
QThe system maximum operation temperature is 40 °C (it is not possible to change this
value, it is only possible to disable the function).
Remember that the longer you use the hydromassage, the lower the water tem-
perature must be (refer to Chapter “Hydromassage - some recommendations”).
QTo turn o the function, press the key displayed (the key brightness will dim).
35
activate
the function