EasyManuals Logo

Jacuzzi Sense User Manual

Jacuzzi Sense
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
TAP FIXTURE WITH SINGLE CONTROL
Before you use any function, you should adjust the water tempera-
ture to the value you want by doing the following:
Turn the ring nut (G) of the deviator to the "shower head" po-
sition (A).
Raise the lever of the mixer (M) and turn it to the right or left
until a desirable temperature is reached.
Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the function you want
to use
Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the function you want
to use
In the event of difficulty...
PROBLEM / solution
WATER IS NOT SUPPLIED FROM VARIOUS FUNCTIONS (SHOW-
ERHEAD, VERTICAL HYDROMASSAGE, ETC.).
Turn on the mixer tap.
THE SHOWERHEAD PROVIDES INADEQUATE PRESSURE
Clean the filter situated between the flexible hose and the shower
head.
LITTLE WATER IS SUPPLIED FROM ALL FUNCTIONS
Check that the plumbing system meets the pressure/capacity spec-
ifications on the technical pre-installation data sheet.
Check that the thermostatic valve filter is not blocked with dirt
and/or lime scale.
THE HYDROMASSAGE PROVIDES INADEQUATE PRESSURE
Clean the nozzles. If this does not work, contact the Jacuzzi
®
Serv-
ice Centre to check the pressure and the water system capacity.
DIFFICULT TO ADJUST THE WATER TEMPERATURE (MIXING)
Check that the pressure values of the system (operating) for hot
and cold water are well-balanced. If the values are different, it is ad-
visable to contact your entrusted plumber.
Maintenance
TAP FIXTURE, SHOWER PANEL
Just dry the various components after use. If it should be neces-
sary to clean them, simply remove any impurities with a soapy
wet cloth or neutral detergent, rinse with clean water and dry.
Do not use abrasive cloths, powder detergents, acetone or
other solvents.
NOZZLES (vertical hydromassage)
SHOWER HEAD
FLEXIBLE SHOWERHEAD
These components are equipped with a scale-removal filter,
which can be cleaned with a sponge. For normal cleaning oper-
ations, see instructions for taps.
D
A
B
G
M
C
Skin

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacuzzi Sense and is the answer not in the manual?

Jacuzzi Sense Specifications

General IconGeneral
BrandJacuzzi
ModelSense
CategoryPlumbing Product
LanguageEnglish

Related product manuals