Jacuzzi SWIMSPA Power Actve J16

37
10.7 Adjusng Filtraon
Main Filtraon
Using the same adjustment as Seng the Time, Filter Cycles are set using a start me and a
duraon. Each seng can be adjusted in 15 minute increments. The panel calculate the end
me and displays it automacally.
Filter Cycle 2—Oponal Filtraon
Filter Cycle 2 is OFF by default.
Viewing Filter 1 while Filter 2 is OFF: Viewing Filter 1 while Filter 2 is ON:
Press “1” to view Filter 1. Press “2” once to view Filter 2. Press “2” again to turn Filter 2 ON or
OFF.
When Filter Cycle 2 is ON, it can be adjusted in the same manner as Filter Cycle 1.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtraon by
the overlap amount.