Jacuzzi SWIMSPA Power Actve J16

39
10.9 Restricng Operaon
The control can be restricted to prevent unwanted use or temperature adjustments. Locking
the Panel prevents the controller from being used, but all automac funcons are sll acve.
Locking the Sengs allows Jets and other features to be used, but the Set Temperature and
other programmed sengs cannot be adjusted. Sengs Lock allows access to a reduced se-
lecon of menu items. These include Filter Cycles, Invert, Informaon and Fault Log. They can
be seen, but not changed or edited.
Panel Locked and Sengs Unlocked
Locking / Unlocking
The same steps are used to Lock and Unlock. To
lock either Sengs or Panel first select the
Sengs (if it says “Unlocked”) or Panel (if it says
“Unlocked”), then press the word “Lock” for 5
seconds. To unlock either Sengs or Panel first
select the Sengs (if it says “Locked”) or Panel
(if it says “Locked”), then press the word “Lock”
for at least 5 seconds.
Press here for 5 seconds to lock or unlock