The Sunrise Pro Wake Up Light (ACA-002-M) is a multi-functional device designed to enhance daily routines by simulating natural sunlight, aiding sleep, and providing various lighting and audio features. It serves as a wake-up light, alarm clock, FM radio, sleep aid, sunlight simulation lamp, ambient lamp, and music player.
Function Description:
The primary function of the Sunrise Pro Wake Up Light is to facilitate a more natural wake-up experience by gradually increasing light intensity, mimicking a sunrise. It also incorporates an alarm clock with customizable settings for time, repeat cycles, music, and light. For sleep, it offers a "Sleep Aid" feature that gradually lowers light brightness and music volume over a set period, helping users fall asleep more easily. The device includes an FM radio for listening to preferred stations and a music function for playing internal sound tracks. Additionally, it features a Sunlight Simulation Lamp for general well-being and an Ambient Lamp with various lighting options to create different atmospheres.
Important Technical Specifications:
- Model: ACA-002-M
- Size: 172 × 171 × 76 mm
- Weight: 320g
- Material: ABS, PC
- FM Radio Frequency: 76.0-108.0 MHz
- Control Mode: Button control
- Adapter: 5V-2A/100-240V
- Certification: FCC, CE, RoHS
Usage Features:
- Power On/Off: The device does not have a dedicated power on/off button. It automatically turns on when the power adapter is plugged into a socket and turns off when unplugged.
- Time Setting:
- Press and hold the "Time Setting" button for 2 seconds until "12H" flashes.
- Rotate the top button to select 12-hour or 24-hour format, then press the "Time Setting" button to confirm.
- When HH:MM is displayed and HH is flashing, rotate the top button to adjust hours, then press the "Time Setting" button to confirm.
- When HH:MM is displayed and MM is flashing, rotate the top button to adjust minutes, then press the "Time Setting" button to confirm.
- When MTWTFSS is displayed and the day indicator is flashing, rotate the top button to adjust the day of the week, then press the "Time Setting" button to confirm.
- A built-in button battery maintains timing for up to three years during power outages.
- Screen Brightness Adjustment:
- Press the "Screen Brightness Adjustment" button to cycle through four brightness levels: Off, Night, Day, and AUTO.
- Off: Screen display is turned off.
- Night: Lowest brightness level.
- Day: Highest brightness level.
- AUTO: Lowest brightness between 10:00 PM and 6:00 AM, highest brightness at all other times.
- Alarm Clock Setting (Alarm 1 and Alarm 2):
- Press and hold the "Alarm 1" or "Alarm 2" button for 3 seconds until the alarm icon flashes and the screen displays the alarm time length.
- Set Hour: While HH is flashing, rotate the top button to adjust the hour, then press the alarm button to confirm.
- Set Minute: While MM is flashing, rotate the top button to adjust the minute, then press the alarm button to confirm.
- Set Repeat Cycle: While the repeat cycle icon is flashing, rotate the top button to select P7 (Every day), P5 (Weekdays), or P2 (Weekends), then press the alarm button to confirm.
- Set Music: While the music icon is shown, rotate the top button to select music (OFF, S01-S07 natural sounds, or broadcast radio), then press the alarm button to confirm.
- Set Radio Frequency (if radio selected): While the MHz icon is shown, rotate the top button to select the frequency, then press the alarm button to confirm.
- Set Volume: While the volume icon is shown, rotate the top button to adjust the volume (U01-U16), then press the alarm button to confirm.
- Set Wake-up Light: While the wake-up light icon is shown, rotate the top button to adjust the light setting (OFF, 00 MIN for immediate turn-on, or 1-120 MIN for gradual brightening), then press the alarm button to confirm.
- Snooze: Press the "Snooze" button when the alarm rings to pause it for 9 minutes (up to 5 times). The snooze icon and alarm icon will flash.
- Stop Alarm: Press the corresponding alarm button (Alarm 1 or Alarm 2) to stop the alarm immediately. If no action is taken for 15 minutes, the alarm stops automatically.
- Enable/Disable Alarm: Press the corresponding alarm button to toggle the alarm on or off. The alarm icon will be on when enabled and off when disabled.
- FM Radio:
- Initial Setup (Automatic Station Search): Press and hold the "Radio" button for 2 seconds. The radio icon will show, and the frequency will automatically increase, saving found stations. The first found station will play automatically.
- Turn On/Off: Press the "Radio" button to turn the FM radio on or off.
- Switch Stations: Press and hold the "Volume +/-" buttons for 2 seconds to switch between saved stations.
- Tune Frequency: Rotate the top button left or right to adjust the frequency in 0.1 MHz increments.
- Adjust Volume: Press the "Volume +/-" buttons to adjust the volume (U01-U16).
- Reception: Fully extend the FM antenna for best reception.
- Sleep Aid:
- Press and hold the "Sleep Aid" button for 2 seconds until the sleep aid icon shows and the screen displays the sleep aid time length.
- Set Time Length: While the time (xx) is blinking, rotate the top button to adjust the duration (5-120 minutes or "ALL" for continuous), then press the "Sleep Aid" button to confirm.
- Set Music: While the music icon is shown, rotate the top button to select music (OFF, SL1-SL3 natural sounds, or broadcast radio), then press the "Sleep Aid" button to confirm.
- Set Volume: While the volume icon is shown, rotate the top button to adjust the volume (U01-U16), then press the "Sleep Aid" button to confirm.
- Set Light: While the light icon is shown, rotate the top button to adjust light options (OFF or C00-C08 colorful effects), then press the "Sleep Aid" button to confirm.
- Start/Stop: Press the "Sleep Aid" button to immediately start or stop the Sleep Aid function.
- Sunlight Simulation Lamp:
- Press the "Sunlight Simulation Lamp" button to turn it on or off.
- Use the "Brightness +/-" buttons to adjust the brightness level.
- Ambient Lamp:
- Press the "Ambient Lamp" button to turn it on or off.
- Use the "Brightness +/-" buttons to adjust the brightness level.
- Hold down the "Ambient Lamp" button to cycle through nine different lighting effects (C01-C09).
- In C09 mode, rotate the top button to adjust the color of the light.
- In C03 mode, rotate the top button to adjust the breathing speed.
- Music:
- Press the "Music" button to turn on or off internal music playback.
- Use the "Volume +/-" buttons to adjust the volume level.
- Hold down the "Music" button to cycle through ten different music tracks (S01-S10) for single track loop playback.
Maintenance Features:
- Cleaning: Clean the product with a soft and dry cloth. Avoid abrasive cleaning agents, pads, or solvents like alcohol or acetone, as they can damage the surface.
- Storage: If not used for an extended period, unplug the power adapter and store the product in a safe, dry location, protected from crushing, banging, or damage. Do not wrap the power cord around the appliance during storage.
Safety Instructions and Cautions:
- For household use only, including hotels; not suitable for commercial use.
- Place on a stable, level, non-slip surface to prevent falls.
- Avoid wet surroundings (bathroom, shower, swimming pool) to prevent water damage and electric shock.
- Prevent water from running into or spilling onto the product.
- Keep the power adapter dry.
- Use only original adapter and USB cable.
- Not a substitute for adequate sleep; designed to aid waking, not reduce sleep time.
- Do not disassemble or collide with the product.
- Avoid high temperature, humidity, and corrosive environments to prevent electric leakage.
- Keep out of reach of children.
- Not fireproof; do not throw into fire or place near fire sources.
- Not waterproof; do not immerse in water.
Need help?
General
To Next Page