Janfire NH User Manual

Janfire NH Burner Service Installation Manual 3.31.09 - Technical specifications are subject to change without prior
notice.
1(38)
Installation and Servicing Instructions
Janfire NH/Integral Pellets Burner with External Auger
For heating contractors. Please read carefully prior to installation and servicing.
Due to constant development, Janfire AB reserves the right to change part or parts of this publication at any time without
notice.

Janfire NH Specifications

General

Brand	Janfire
Model	NH
Category	Burner
Language	English

Summary

Safety Instructions

General Information

Read safety instructions carefully before installation and maintenance. Follow warning signs for safe operation.

Safety Instructions for Installation and Service

Details safety requirements for electrical, plumbing, and chimney work by qualified personnel.

Safety Systems

Boiler Installation

Boiler Evaluation

Mounting the Burner

Step-by-step instructions for physically installing the burner onto the boiler.

Mounting and Elongating the Extension Auger

Pellet Level Adjustment

Pellet Density Settings

Pellet Filling Before Starting the NH Burner

Steps for filling the pellet storage and initiating the burner start-up sequence.

Calibration of temperature sensors

Starting and Stopping the NH Burner

Starting the NH Burner

Detailed steps for initiating the burner operation and setting the output level.

Stopping the NH Burner

Methods to safely stop the burner, including standby and shutdown procedures.

NH Burner Menu System

User Menu

Service Menu