GENERAL DIRECTIONS AND RECOMMENDATIONS A
Safety
For safety reasons, the sewing machine must
be disconnected from the mains:
- Whenever the machine is left unattended
- Whenever preparing the machine for sewing
- Whenever servicing
- Whenever replacing mechanical or electrical parts or accessories
Needles
Usually needles of the system 130/705 H may be used. However, in certain
cases stitch quality may be improved by using type ELX 705 needles.
Choose needle size No.80 for sheer materials and No.90 for normal or thick materials.
Threads
Choose a good quality polyester thread or blended thread.
Lubrication
Besides the 2 oiling points marked in red, the machine is equipped with
self-lubrication bearings and parts. Lubricate the machine as follows: when using it
for the first time - if it has not been used for some time - when it has been intensively
used for 7 to 8 hours.
2
To Next Page
Loading...
