Janome 419S - SECTION 5. DECORATIVE STITCHING; Shell Tuck and Stretch Stitch Patterns

26
Shell Tuck
Pattern selector: G
Presser foot: Zigzag foot
Thread tension: 6–8
Stitch length: 2–3
Stitch width: 5
4
1
2
3
SECTION 5. DECORATIVE STITCHING
4
1
2
3
4
1
2
3
Stretch Stitch Patterns
Pattern selector: A–J (Model 419S)
A–L (Model 423S)
Presser foot: Zigzag foot
Thread tension: 1–4
Stitch length: S.S.
Stitch width: 5
4
1
2
3
Fold the fablic in bias.
Place the folded edge along the slot of foot.
The needle should fall off the edge of the fabric on the
right forming tucks.
If forward and reverse feeds become unbalanced due to
the type of fabric, adjust the balance by slide the stitch
length control as follows:
If patterns are compressed, slide the stitch length control
toward " + ".
If patterns are drawn, slide the stitch length control toward
" – ".
(See page 12 )
5
5
5
5