Janome 990D - Table of Contents

TO CHANGE THE FACE PLATE UNIT ................................................................................................................... 1
TO CHANGE THE BELT COVER UNIT ....................................................................................................................2
TO CHANGE THE TOP COVER ...............................................................................................................................3
TO CHANGE THE FRONT COVER UNIT.................................................................................................................4
TO CHANGE THE SIDE COVER UNIT ....................................................................................................................5
TO CHANGE THE MACHINE BASE UNIT ...............................................................................................................6
TO CHANGE THE MACHINE SOCKET....................................................................................................................8
PREPARATION BEFORE THE ADJUSTMENT ........................................................................................................8
TO ADJUST THE NEEDLE HEIGHT ........................................................................................................................9
TO ADJUST THE PRESSER BAR HEIGHT ...........................................................................................................10
TO ADJUST THE FEED DOG HEIGHT ..................................................................................................................11
TO ADJUST THE TIMING OF THE NEEDLE AND THE FEED DOG ..................................................................... 12
TO ADJUST THE TIMING OF THE NEEDLE AND THE UPPER KNIFE................................................................13
TO ADJUST THE HEIGHT OF THE LOWER LOOPER..........................................................................................14
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND THE LOWER LOOPER/NEEDLE GUARDS .. 15
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND THE LOWER LOOPER/NEEDLE GUARDS .. 16
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND THE FIXED NEEDLE GUARD .......................17
TO ADJUST THE POSITION OF THE CHAINING FINGER ...................................................................................18
TO ADJUST THE POSITION OF THE UPPER LOOPER.......................................................................................19
TO ADJUST THE TIMING OF THE NEEDLE AND THE LOWER LOOPER........................................................... 20
TO ADJUST THE TIMING OF THE UPPER AND LOWER LOOPERS .................................................................. 21
TO ADJUST THE CLEARANCE BETWEEN THE LOOPERS ................................................................................22
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND THE UPPER LOOPER................................... 23
TO ADJUST THE POSITION OF THE KNIVES ......................................................................................................24
TO ADJUST THE POSITION OF THE LOWER LOOPER THREAD GUIDE .......................................................... 25
TO ADJUST THE STITCH LENGTH.......................................................................................................................26
TO ADJUST THE THREAD TENSION DIALS ........................................................................................................27
PARTS LIST .......................................................................................................................................................28-47
TABLE OF CONTENTS