Janome 990D - To Change the Machine Base Unit

6
990D
Washer
Washer
Base
cushion F
Hinge screw E
Setscrew C
Setscrew B
Machine base
Setscrew A
Setscrew D
To remove:
1. Remove the setscrews A, B, C, D and two hinge screws E, and remove two base cushions F
and washers.
2. Remove the machine base.
NOTE: Do not remove another two base cushions.
To attach:
3. Attach the machine base unit, and tighten the setscrews A, B, C and D.
4. Attach the two base cushions F, washers, and tighten the hinge screws E.
TO CHANGE THE MACHINE BASE UNIT