64
Blind Hem Stitch
Machine setting
q Pattern or
w LED display
e Foot G: Blind hem foot
qw e
q
w
q
w
t
r
e
y
z
x
c
v
v Open the fabric after sewing is finished.
y Right side of the fabric
NOTE:
If the needle pierces too far left, the stitches will
show on the right side of fabric.
c Turn the guide screw to adjust the position of the
guide to match it with the folded edge. Sew guiding
the folded edge along the guide.
e Guide screw
r Guide
t Folded edge
x Place the fabric so that the needle just pierces the
folded edge when the needle comes over the
extreme left side. Lower the presser foot.
z Fold hem with the wrong side up forming a
0.4–0.7 cm (3/16-5/16") allowance.
q Wrong side of the fabric
w 0.4–0.7 cm (3/16-5/16")
aa
aa
a On heavy weight fabrics that ravel, the raw edge
should be overcast first.
ss
ss
s Fold the hem under the fabric as illustrated for fine
or medium fabrics.
aa
aa
a
ss
ss
s
To Next Page
Loading...
