26
Sensor Buttonhole, cont'd
x Pull the button holder to the back, and place the
button in it. Push it together tightly on the
button.
w
Button holder
c Pull the buttonhole lever downward as far as it
will go.
e
Buttonhole lever
v Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the
needle at the starting point. Then lower the
automatic buttonhole foot.
r
Mark
t
Needle thread
y
Bobbin thread
u
Starting point
b Depress the foot control until the machine stops
by itself.
* The buttonhole will be sewn automatically; the
front bartack and left row first, then the right
row and back bartack. The machine will stop
automatically when the buttonhole is completed.
Remove the fabric and place a pin just before the
bartack at each end to prevent accidentally cutting
bartacks. Cut the opening with the seam ripper.
When finished, push the buttonhole lever upward
as far as it will go.
i
Step 1
o
Step 2
!0
Step 3
!1
Square buttonhole
!2
Keyhole buttonhole
!3
Pin
!4
Seam ripper
!5
Eyelet puncher
oi
w
e
r
t
y
u
x
c
v
!0
b
!1
!3 !4
!2
!5
To Next Page
Loading...
