Janome Harmony 8100 - Sensor Buttonholes; Three Types of Buttonhole; Preparation for Sewing

25
Sensor Buttonholes
¡ Three types of Buttonhole
q
Square Buttonhole
For buttonholes on shirts and blouses.
Stitch patterns 18 and 19 are intended to be used on
stretch fabrics.
w
Rounded Buttonhole
For buttonholes on shirts and blouses made of fine
fabric.
e
Keyhole Buttonhole
For buttonholes on jackets.
¡ Preparation for Sewing
Attach the automatic buttonhole foot R. Make sure the
groove on the holder catches the pin on the foot, when
lowering the presser foot.
q
Groove
w
Pin
q
w
e
q
w
z
q
¡ To Sew
z The size of buttonhole is automatically set by
placing the button in the rear of the automatic
buttonhole foot.
The button holder on the foot takes a button up to
2.5 cm (1" ) in diameter.
Alter the buttonhole width to match the material
and thread (see page 27).
Make a test buttonhole on an extra piece of the
fabric to check your settings.
Use interfacing on stretch fabrics.
q
Buttonhole double sewing key :
If you want to sew double the stitching on a
buttonhole, press this key before selecting a buttonhole
pattern.