43
Ｌ
Ｒ
ABC
¡ To set the Fabric in the Embroidery Hoop
z First, mark the embroidering position on the
fabric with tailor's chalk.
q
Fabric
w
Reference line
x Second, loosen the tightening screw on the outer
hoop, lay the fabric on it, and press the fabric
down with the inner hoop.
e
Inner hoop
r
Right side of fabric
t
(Interfacing)
y
Outer hoop
u
Hoop tightening screw
c Third, tighten the hoop screw with your fingers.
v Put the template on the fabric, and match the
reference lines on the template and fabric.
i
Reference lines on the template
o
Reference line on the fabric
!0
Template
b Press them all into the outer hoop taking care that
the reference lines on the fabric and template do
not move away from each other.
n Take out the template by putting your finger in
the thumb hole.
!1
Take off hole (thumb hole)
!1
o
!0
i
u
u
t
y
r
e
q
w
z
x
c
v
b
n
To Next Page
Loading...
