44
¡ Threading the Machine
For threading, refer to the description of ordinary
sewing (see page 10 ).
Pass the needle thread through the hole in the
Embroidery Foot P in the downward direction, and
guide the thread around the thread holder from the
front side. (Leave 2 to 3 cm [1" ] hanging.)
q
Thread cutter
w
Needle thread
e
Bobbin thread
¡ To Attach the Embroidery Hoop to the Machine
Turn the knob so it is parallel with the hoop, and set it
on the carriage.
Attach the outer hoop by fitting the prong into the
carriage, and turning the knob clockwise.
q
Knob
w
Carriage
e
w
q
w
q
To Next Page
Loading...
